Glossary · timing
Posting window
Short answer
A posting window is the span of time during which a scheduled run actually delivers your post to each group. With pauses between posts it isn't a single moment: with MultiGroupPoster's default random 3–6 minute pauses after every 1–3 posts, a run to 20 groups can take around an hour. Plan the window, not just the start time.
A posting window is the period from the first to the last post of a scheduled run. When a scheduler pauses between groups — as it should — your "9:00 post" really means "a run that starts at 9:00 and finishes some time later".
Estimating the window
MultiGroupPoster's default pacing is a random pause of about 3–6 minutes after every 1–3 posts, and the pauses grow on longer runs: 1.5× from 10 posts, 2.5× from 30, 4× from 60 and 6× from 100. Runs to more than 60 groups also add about 4–7 seconds before every post.
A rough estimate from those documented defaults (our arithmetic, not a vendor figure):
| Groups in run | Approximate window |
|---|---|
| 5 | 5–15 minutes |
| 10 | 15–30 minutes |
| 20 | around an hour |
| 40 | well over an hour, as pauses lengthen |
Your real window varies because the pauses are random. Check the progress panel on your first runs and note how long they took.
Fitting the window to your members
If members are most active 18:00–20:00, start early enough that the whole window falls inside that range — or split the list into two smaller runs. With members in several time zones, plan the window in their local time; see time-zone offset.
Window vs late start
If the computer was asleep at the scheduled time, MultiGroupPoster still starts a run up to 2 hours late; after that it's "Missed". A late start shifts the whole window. That's one more reason to keep the posting computer awake through the full window, not just at the start.
More on picking slots in best time to post in groups and on structuring runs in the weekly posting calendar.
Sources
Frequently asked questions
Why don't all my groups get the post at the scheduled minute?
Because good schedulers pause between posts. Sending to every group in the same minute looks automated; spreading posts over a window is deliberate.
Can I shorten the posting window?
You can customize pacing (1–60 minutes after every 1–50 posts), but shorter pauses mean posting faster. The safer way to shorten a window is a smaller group list per run.
Is the 2-hour late window the same as the posting window?
No. The 2-hour rule is about when a run may start if your computer was asleep. The posting window is how long the run takes once it starts.
Cite this page
MultiGroupPoster. “Posting window.” Best Facebook Group Scheduler, updated 2026-11-17. https://bestfacebookgroupscheduler.com/glossary/posting-window/