Guide · timing · no made-up statistics
The best time to post in Facebook groups: a method to find your own
Short answer
There is no reliable universal best time to post in Facebook groups — each group has its own rhythm, rules and admin schedule. Find yours: note when recent posts in the group get comments, check when promotion is allowed and when posts get approved, test two or three time slots for two weeks, and keep the slot that brings the most replies.
"What's the best time to post in Facebook groups?" is one of the most searched scheduling questions, and most answers give a specific hour backed by data from somewhere else — Pages, ads, or a platform-wide average. We're not going to do that, because we don't have data that applies to your groups, and neither does anyone else without testing them. Instead, this guide gives you a method that takes about two weeks and produces an answer for your groups, based on their activity and your results.
Why universal "best times" fail for groups
- Every group has its own audience. A parents' group, a night-shift workers' group and a student housing group are active at different hours.
- Rules decide timing first. Many groups only allow promotion on a set day or in a weekly thread. The "best time" in that group is whenever the rules allow.
- Approval delays move your post. In groups that hold posts for review, members see your post when an admin approves it, not when you scheduled it.
- Time zones. Members of one group can be spread across several. See time zones and scheduling.
Step 1: Read each group's activity
Open the group and scroll through its most recent posts (20–30 is enough). For each, note roughly when it was posted and when most comments came in. Record it in a simple table:
| Group | Posts with most comments were posted… | Comments mostly arrive… | Promo rule | Approval needed? | Typical approval delay |
|---|---|---|---|---|---|
| Oakwood Neighbors | Weekday evenings | Within 3 hours | Saturdays only | Yes | Same day |
| Remote Design Jobs | Weekday mornings | Over the next day | Any day, with pay range | No | — |
If you're an admin, Group Insights shows member activity directly; use it for your own group.
Step 2: Pick two or three candidate slots
From the table, choose two or three slots per group list — for example "weekday 8–9 a.m." and "weekday 7–8 p.m." for the first group above, but only on Saturdays because of its rule. Also apply one practical filter:
General advice (not data): pick slots when you can reply in the first couple of hours. Comments that get answered keep a post alive; a post that goes out while you're unavailable loses that momentum. And if you schedule with a browser extension, pick slots when your computer will be on.
Step 3: Run a two-week rotation
Keep everything else constant — same template family, same groups, similar offers — and vary only the time.
| Week | List A | List B |
|---|---|---|
| Week 1 | Slot 1 (e.g. morning) | Slot 2 (e.g. evening) |
| Week 2 | Slot 2 | Slot 1 |
Swapping slots between lists in week 2 helps separate "this time works" from "this list works". In MultiGroupPoster's Facebook group post scheduler, set each as a Once schedule, or a Week schedule you edit after the first week. A post up to 2 hours late still goes out, so a sleeping laptop won't silently shift your test by hours — but check the post history for any "Missed" runs and exclude them.
Step 4: Measure what matters
For each post, 24–48 hours later, record:
- Status: published, pending, approved later, declined, failed (from your posting tool's history).
- Comments in the first 24 hours (excluding your own).
- Clicks from tagged links, if you use them.
- Enquiries or leads you can trace to the post.
Reactions are worth noting but are the weakest signal. Comments and enquiries decide the winner.
Step 5: Decide and write it down
Compare the slots per list. If one slot clearly wins on comments and leads across both weeks, make it that list's default and enter it in your weekly posting calendar. If results are close, pick the slot that suits your reply availability — it's a tie, and convenience is a legitimate tiebreaker.
What "clearly wins" means: consistent across both weeks and both lists, not one lucky post. With the small numbers typical of group marketing, treat differences of one or two comments as noise.
Step 6: Re-test regularly
Groups change — new members, new rules, new admins, seasons, school terms. Re-run a short test every quarter, or sooner if a list's results drop for several weeks.
A filled-in example (illustrative)
A recruiter posting remote jobs tests two slots across two lists over two weeks. Morning posts get most of their comments the same day; evening posts get fewer comments but more direct messages. The recruiter keeps mornings for job posts and moves "career tips" community posts to evenings. The point isn't these particular hours — it's that the answer came from their own groups, not a chart.
A test log you can copy
| Date | List | Slot | Groups | Published | Pending → approved | Comments (24h) | Clicks | Leads | Notes |
|---|---|---|---|---|---|---|---|---|---|
| Week 1 Tue | A | Slot 1 | 12 | ||||||
| Week 1 Thu | B | Slot 2 | 10 | ||||||
| Week 2 Tue | A | Slot 2 | 12 | ||||||
| Week 2 Thu | B | Slot 1 | 10 |
Fill it in 24–48 hours after each post. Put anything unusual in Notes — a holiday, a local news event, a post that went to approval and was approved a day later — because one odd day can swing small numbers. At the end, add up comments and leads per slot (not per list) to compare the slots.
Admins: use Insights, then test anyway
If you run your own group, Group Insights shows when members are active, which gives you better candidate slots than reading timestamps by hand. Still test them: when members are online and when they respond to announcements aren't always the same thing.
Common mistakes
- Copying a "best time" from a Page-marketing article.
- Changing the post and the time in the same test.
- Testing in one week only.
- Ignoring approval delays in groups that review posts.
- Choosing a slot when you can't reply, or when the computer running your scheduler is off.
Sources
Frequently asked questions
Why don't you publish a best time to post in Facebook groups?
Because we have no trustworthy data that applies to your groups. Published "best times" are usually averages across Pages or whole platforms, and a neighborhood group, a job group and a hobby group behave very differently.
How long should a posting-time test run?
At least two weeks, so each slot gets tried on similar days with similar posts. One post at each time is not enough to tell luck from a pattern.
Does the time I schedule matter if the group needs approval?
Less than you'd think. A pending post is visible to members only after an admin approves it, so admin review times matter as much as your scheduled time. Note when your posts usually get approved in each group.
Should I post at the same time in every group?
Not necessarily. Groups with different audiences (local parents vs remote workers vs students) can have different active hours. Split them into lists and test each list separately.
Cite this page
MultiGroupPoster. “The best time to post in Facebook groups: a method to find your own.” Best Facebook Group Scheduler, updated 2026-11-17. https://bestfacebookgroupscheduler.com/guides/best-time-to-post-in-groups/